TB/T 3012-2006 铁道货车铸钢摇枕、侧架技术条件
作者:标准资料网 时间:2024-05-06 23:35:56 浏览:8528
来源:标准资料网
基本信息
| 标准名称： | 铁道货车铸钢摇枕、侧架技术条件 |
| 英文名称： | Specification of cast steel bolster and side frame for railway freight car |
| 中标分类： |
铁路 >>
机车车辆通用标准 >>
机车车辆检修工艺与设备 |
| ICS分类： |
铁路工程 >>
铁路车辆
|
| 替代情况： | TB/T 3012-2001;被TB/T 3212.1-2009;TB/T 3212.2-2009代替部分 |
| 发布部门： | 中华人民共和国铁道部 |
| 发布日期： | 2006-04-10 |
| 实施日期： | 2006-07-01 |
| 首发日期： | |
| 作废日期： | 2010-05-01 |
| 主管部门： | 中华人民共和国铁道部 |
| 提出单位： | 中国南车集团戚墅堰机车车辆工艺研究所 |
| 归口单位： | 中国南车集团戚墅堰机车车辆工艺研究所 |
| 起草单位： | 戚墅堰机车车辆工艺研究所、齐齐哈尔铁路车辆（集团）有限责任公司 |
| 起草人： | 于会彬、董雯、刘胜田、蒋田芳 |
| 出版社： | 中国铁道出版社 |
| 出版日期： | 2006-07-01 |
| 页数： | 35页 |
适用范围
本标准规定了铁道货车用B级铸钢和C级铸钢摇枕、侧架的技术要求、试验方法、检验规则、标记及质量证明书等。
本标准适用于铁道货车用B级铸钢和C级铸钢摇枕、侧架的制造与检验。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类： 铁路 机车车辆通用标准 机车车辆检修工艺与设备 铁路工程 铁路车辆
Product Code:SAE J814
Title:Engine Coolants
Issuing Committee:Cooling Systems Standards Committee
Scope: 1.1This SAE Information Report is a source of information concerning the basic properties of engine coolants which are satisfactory for use in internal combustion engines. Engine coolant concentrate (antifreeze) must provide adequate corrosion protection, lower the freezing point, and raise the boiling point of the engine coolant. For additional information on engine coolants see ASTM D 3306 and ASTM D 4985.1.2The values presented describe desirable basic properties. The results from laboratory tests are not conclusive, and it should be recognized that the final selection of satisfactory coolants can be proven only after a series of performance tests in vehicles.1.3The main body of this document also describes in general the necessary maintenance procedures for all engine coolants to insure proper performance. In addition, special requirements for coolants for heavy-duty engines are covered in Appendix A.1.4This document does not cover maintenance of engine cooling system component parts.The main body of this document also describes in general the necessary maintenance procedures for all engine coolants to insure proper performance. In addition, special requirements for coolants for heavy-duty engines are covered in Appendix A.This document does not cover maintenance of engine cooling system component parts. That topic is discussed in detail in SAE HS 40.
Rationale: 1.1This SAE Information Report is a source of information concerning the basic properties of engine coolants which are satisfactory for use in internal combustion engines. Engine coolant concentrate (antifreeze) must provide adequate corrosion protection, lower the freezing point, and raise the boiling point of the engine coolant. For additional information on engine coolants see ASTM D 3306 and ASTM D 4985.1.2The values presented describe desirable basic properties. The results from laboratory tests are not conclusive, and it should be recognized that the final selection of satisfactory coolants can be proven only after a series of performance tests in vehicles.1.3The main body of this document also describes in general the necessary maintenance procedures for all engine coolants to insure proper performance. In addition, special requirements for coolants for heavy-duty engines are covered in Appendix A.1.4This document does not cover maintenance of engine cooling system component parts.The main body of this document also describes in general the necessary maintenance procedures for all engine coolants to insure proper performance. In addition, special requirements for coolants for heavy-duty engines are covered in Appendix A.This document does not cover maintenance of engine cooling system component parts. That topic is discussed in detail in SAE HS 40.【英文标准名称】:Industrialcommunicationnetworks-Wirelesscommunicationnetworkandcommunicationprofiles-WirelessHART?
【原文标准名称】:工业通讯网络.无线通讯网络和通讯配置文件.无线HART
【标准号】:BSEN62591-2010
【标准状态】:现行
【国别】:英国
【发布日期】:2010-07-31
【实施或试行日期】:2010-07-31
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:应用层;自动化;电路网络;通讯;控制设备;控制系统;控制工艺学;数据通信;数据链层;数据网络;数据处理;数据服务;数据传送;定义;数字的;数字数据;数字工程;电子数据处理(EDP);电气工程;电子仪器;电子系统;HART;信息交换;信息处理;信息技术;接口(数据处理);制造;网络控制系统;开放系统互连(OSI);物理层;过程控制;过程控制工程;工艺工程;加工工程;配置文件;规范;传输媒质;传输协议;无线的
【英文主题词】:Applicationlayer;Automation;Circuitnetworks;Communication;Controlequipment;Controlsystems;Controltechnology;Datacommunication;Datalinklayers;Datanetwork;Dataprocessing;Dataservices;Datatransfer;Definitions;Digital;Digitaldata;Digitalengineering;EDP;Electricalengineering;Electronicinstruments;Electronicsystems;HART;Informationinterchange;Informationprocessing;Informationtechnology;Interfaces(dataprocessing);Manufacturing;Networkcontrolsystem;OSI;Physicallayers;Processcontrol;Processcontrolengineering;Processengineering;Productionengineering;Profile;Specification;Transmissionmedia;Transmissionprotocol;Wireless
【摘要】:ThisInternationalStandardspecifiesanadditionalType20communicationnetworktoIEC61158-5-20,IEC61158-6-20andaCommunicationProfileCP9/2inadditiontoIEC61784-1CPF9.Thisstandardspecifiesthefollowing:?Physicallayerservicedefinitionandprotocolspecification,?Data-linklayerserviceandprotocol,?Applicationlayerserviceandprotocol,?Networkmanagement,?Security,?Communicationprofile,?Wirelessproceduresand?Gateway.
【中国标准分类号】:M10
【国际标准分类号】:25_040_40;35_100_05
【页数】:452P;A4
【正文语种】:英语
